Motorola M68MMDS05 Development System: $599

NEW!! X10 Home Automation & Security Products!!

Subscribe to our Newsletter Read Our Refund Policy

M68MMDS05 In-Circuit Emulator

The Motorola Modular Development System (MMDS) is a full-featured emulator system for developing embedded systems using 68HC(7)05. In addition to incorporating the debug features of the Motorola Modular Evaluation System (MMEVS), the MMDS adds advanced features such as real-time, dual-ported memory and a bus state analyzer to capture user-defined bus cycles or events. Use the dual-ported memory to tune filter circuits or monitor changes to program variables while your program is running at full speed. Verify nested or complex program flows using the bus state analyzer's full range of sequenced or logical event triggering and data capture modes. These added features help users develop, debug, and deliver 68HC05 products in less time.

Includes M68MMDS05 Station Module (mother board), CD-ROM
with Lots of Docs and Software from the old Motorola Website (including personality files), new 9-pin serial cable and power cable. Choose from our available stock of Emulation Modules and Flex Cables (not included), or use your own.

MMDS05 Features:

Real-time, non-intrusive, in-circuit emulation at the operating frequency of the target device
Control of code execution in run or step mode
8Kx64 real-time trace buffer
16-bit time tag, or optional 24-bit time tag
4 complex breakpoints (any combination of address, data, control, and/or I/O)
64 instruction breakpoints
32 real-time variables
32 bytes of real-time memory
64K bytes of fast emulation memory (SRAM)
Current limited target input/output connections
Command and response logging to save session history and/or to generate script files
SCRIPT command for automatic execution of a sequence of commands (such as system configuration setup and automated test runs)
Assembly source-level debugging
Host/emulator communications speeds as high as 57,600 baud
Extensive on-line device information via CHIPINFO command
Support for full suite of separately purchased device-specific Emulator Modules (EMs) and flexible target system cables

Close-up of motherboard.

Rear apron with power and serial cable connections
(brand-new power cord & serial cable included)

Serial Number: XET0199
MFG. Date: 12-22-1997

Includes MMDS05 software for DOS (runs under Windows 98, but not XP)

This modular development system would cost well over $3000 if purchased new. These systems are NO LONGER AVAILABLE new! Buy this used but tested system for only $250! Backed by a 30-day Warranty. This last unit was our personal system. We used it to create a product several years ago for a local company (which was never released). So there is no longer a reason to hang onto the system. The C9A module and flex cable / adapter were also part of this system (sold separately).

MMDS05 Modular Evaluation System

Price: $250

Need Logic Clips for your MMDS System?

Please check out our growing selection of Emulation Modules, Target Adapters & Flex Cables in stock.

[ Home ] [ Contact ] [ News ] [ Products ] [ Web Hosting ]
Send mail to with questions or comments about this web site.
Copyright © 2007 ElectronicBrains.com Last modified: October 05, 2007
All custom images © 2007 ElectronicBrains.com - unauthorized duplication or distribution is prohibited!