|
|
 |
The PicBasic Pro Compiler is the easiest way
for you to program the fast and powerful Microchip Technology PICmicro
microcontrollers. PicBasic Pro converts your BASIC programs into files
that can be programmed directly into a PICmicro MCU.
The PicBasic Pro Compiler features: BASIC
Stamp II commands, direct and library routine access to pins on PORTA,
C, D, E, as well as PORTB, arrays, real IF..THEN..ELSE and interrupt
processing in BASIC.
|
|
The PicBasic Pro Compiler gives you direct access to all of
the PICmicro MCU registers - I/O ports, A/D converters, hardware serial
ports, etc. - easily and in BASIC! It automatically takes care of the page
boundaries and RAM banks. It even includes built-in commands to control
intelligent LCD modules! The PicBasic Pro Compiler
instruction set is
upward compatible with the BASIC Stamp II and Pro uses BS2 syntax.
Programs
can be compiled and programmed directly into a PICmicro MCU, eliminating the
need for a BASIC Stamp module. These programs execute much faster and may be
longer than their Stamp equivalents. They may also be protected so no one
can copy your code.
The PicBasic Pro Compiler is a DOS command line application (it also
works in Windows) and runs on PC compatibles.
It can create programs for any
of Microchip's PICmicro microcontrollers and works with most PICmicro MCU
programmers, including our
melabs Serial Programmer.
A printed manual and
sample programs
are included to get you started.
The PicBasic Pro Compiler can also be used inside Microchip's MPLAB IDE.
This allows programs to be edited and simulated within Windows. |
- True compiler provides faster program execution and longer programs than
BASIC interpreters
- Direct and library routine access to any pin or register
- Automatic page boundary handling past 2K
- Bit, byte and word arrays
- Real If..Then..Else..Endif
- Hierarchal expression handling
- Interrupts in BASIC and assembler
- BASIC Stamp I and II library
- Built-in LCD support
- Oscillator support from 3.58MHz to 40MHz
- I2C instructions to access more external devices including serial EEPROMs
- In-line assembler and Call support
- MPLAB / MPASM / ICE compatibility
- Use in DOS or Windows
- Supports all Microchip PICmicro microcontrollers
|
 |
CodeDesigner Lite allows you to write code in a PicBasic-friendly
environment. Color-coded
syntax,
compile and launch programmer from toolbar, multiple documents,
and more. (Windows 95/98/ME/NT/2000/XP)
|
|
PicBasic Pro Compiler + CodeDesigner Lite |
Price:
$249.95
SALE: $239.95 |
|
Or, save even more with this Special
Bundle:
==>**Do
you work with LCDs? Try our LCD Enclosures!**<==
|
